Sketch：product descriptionExtrusion granulation is a relatively new dry granulation process for producing compound fertilizers. Extrusion granulation was used in the field of fertilizer to granulate potassium chloride in the early days. The granular (1-4mm) …

Sketch：OverviewThe RL type granulator utilizes the characteristic that the melting point of the material is lower than 250℃. According to the viscosity range of the material in the molten state, the molten liquid is uniformly distributed on the steel belt m…

Sketch：working principleThe powder material and the binder are fully mixed from the bottom mixed slurry in a cylindrical container to form a wet soft material, and then cut into uniform wet particles by a side-mounted high-speed crushing paddle. Performance …

Sketch：Scope of applicationThis machine is used in the pharmaceutical, food, granular, chemical, solid beverage and other industries to make the mixed materials into the required particles, especially suitable for materials with higher viscosity. Performance…

Sketch：working principle◎Low heat during work. Less dust.◎The stator screen is made of stainless steel and is not easily damaged.◎The gap between the crushing knife and the screen is adjustable.◎Can handle sticky, gum-like, hot and wet materials.Adapt to…

Sketch：working principleThe agitated material is made into particles of the required size, or agglomerated materials are broken into small particles.Adapt to materialsThis machine is suitable for granulating in the pharmaceutical, chemical, food, solid bever…

Sketch：Performance characteristicsThe mixing cylinder has a unique structure, high mixing efficiency, no dead corners, the cylinder body is made of stainless steel, the inner and outer walls are polished, the appearance is beautiful, the mixing is uniform, a…

Sketch：Performance characteristics◎This machine transfers powder or granular materials into a double cone container through vacuum conveying or manual feeding. As the container continues to rotate, the materials undergo complex impact motions in the contain…

Sketch：product descriptionThe rotation of the screw causes the material to produce compound movement in the cone, which mainly produces four forms of movement:1. The spiral revolves along the wall to make the material move in a circle along the cone wall;2. …

Sketch：working principleThe two-dimensional mixer is mainly composed of three parts: a rotating drum, a swing frame, and a frame. The rotating drum is mounted on a swing frame, supported by four rollers and axially positioned by two stop wheels. Among the fo…

Sketch：Performance characteristicsDriven by the drive shaft, the loaded cylinder makes repeated translation, rotation, and tumbling motions to promote the three-way compound movement of the material along the cylinder, thereby realizing the mutual flow, diff…

Sketch：working principleThis model is composed of a container, spiral mixing blades and transmission components: the spiral blades are generally made of double or triple layers. The outer spiral gathers materials from both sides to the center, and the inner …