Drying equipment series

Sketch：Working principle The hot air enters the bottom of the dryer tangentially, and is driven by the agitator to form a powerful rotating wind field. The paste material enters the dryer from the screw feeder. Under the strong action of the high-speed rotat…

Sketch：Working principleThe material enters the machine from the feed inlet. Under the action of vibration, the material is thrown along the horizontal fluidized bed and moves forward continuously. After the hot air passes through the fluidized bed and excha…

Sketch：product description SZG double-cone vacuum dryer is a new generation drying device developed by our factory in combination with the technology of similar domestic products. The double-cone vacuum adopts two elastic connection methods of belt and chain…

Sketch：working principleThe so-called vacuum drying is to heat and dry the dried materials under vacuum conditions. If a vacuum pump is used to extract air and moisture, the drying speed will be accelerated.Note: If a condenser is used. The solvent in the ma…

Sketch：The so-called vacuum drying is to heat and dry the dried materials under vacuum conditions. If a vacuum pump is used to extract air and moisture, the drying speed will be accelerated...

Sketch：Product descriptionSpray drying is a more widely used process in the liquid process forming and drying industry. It is especially suitable for generating powdery and granular solid products from solutions, emulsions, suspensions and pasty liquid mater…

Sketch：The YPG series pressure spray (cooling) dryer adopts a pressure atomizer to atomize the solution or slurry material into fine droplets with the pressure of the diaphragm pump, so that the surface area is significantly increased...

Sketch：The high-speed centrifugal spray device for Chinese medicine extract is the application of centrifugal spray drying technology in the drying of specific materials.

Sketch：Product descriptionThe CT-C series hot air circulation oven is equipped with a low-noise, high-temperature-resistant axial flow fan and an automatic temperature control system. The entire circulation system is fully enclosed, which improves the therma…

Sketch：Product Description◎There are three types of heating sources: steam, electricity and electric steam.◎Using temperature: steam heating 50-140℃, up to 150℃; electric heating 50-350℃;◎The temperature is automatically controlled and recorded by a re…

Sketch：Boiling drying, also known as fluidized bed, is composed of air filter, heater, fluidized bed host, cyclone separator, bag filter, high-pressure centrifugal fan, and operating table.

Sketch：Working principleAfter the air is heated and purified, it is introduced from the bottom by the induced draft fan and passes through the perforated plate of the hopper. In the working chamber, fluidization is formed by the action of stirring and negati…