Catalyst vacuum dryer

Overview of catalyst materials
The role of a catalyst in a chemical reaction is called catalysis. Catalysts are also called catalysts in industry.

The composition, chemical properties and quality of the catalyst itself do not change before and after the reaction; its relationship with the reaction system is like the relationship between a lock and a key, with a high degree of selectivity (or specificity). A catalyst does not catalyze all chemical reactions. For example, manganese dioxide catalyzes the thermal decomposition of potassium chlorate to accelerate the rate of chemical reactions, but it does not necessarily catalyze other chemical reactions. Certain chemical reactions are not only catalysts. For example, potassium chlorate can be catalyzed by the thermal decomposition of magnesium oxide, iron oxide and copper oxide. Moreover, a chemical reaction does not have only one catalyst. For example, red brick powder or copper oxide can be used as a catalyst when preparing oxygen from potassium chlorate.

Overview of catalyst double cone rotary vacuum dryer equipment
The catalyst double-cone rotary vacuum dryer is a double-cone rotary tank. When the tank is in a vacuum state, steam or hot water is introduced into the jacket for heating. The heat contacts the wet material through the inner wall of the tank, and the wet material absorbs heat. The evaporated water vapor is pumped away through the vacuum exhaust pipe by the vacuum pump. Since the tank body is in a vacuum state, and the rotation of the tank body continuously turns the material up and down, it accelerates the drying speed of the material, improves the drying efficiency, and achieves the goal of uniform drying.

The catalyst double cone rotary vacuum dryer is a new type of dryer integrating mixing and drying. The condenser, vacuum pump and dryer are matched to form a vacuum drying device. (If the solvent needs to be recovered in the process, the condenser can be omitted) The design of this machine is advanced. At the same time, because the material rotates when the container itself rotates, but the material does not accumulate on the container, the heat transfer coefficient is high and the drying rate is high, which not only saves energy.

Engineering principle of catalyst double cone rotary vacuum dryer
The catalyst double cone rotary vacuum dryer is a new type of dryer integrating mixing and drying. The condenser, vacuum pump and dryer are matched to form a vacuum drying device. This machine has advanced design, simple internal structure, easy cleaning, all materials can be discharged, and easy operation. Can reduce labor intensity and improve working environment. At the same time, because the material rotates when the container itself rotates and no material accumulates on the wall of the container, the heat transfer coefficient is high, the drying rate is large, not only energy saving, but also the material is dried uniformly and fully, and the quality is good. It can be widely used for drying materials in pharmaceutical, chemical, food, dye and other industries. Comply with the requirements of "GMP" of Drug Administration Regulations.

Features of catalyst double cone rotary vacuum dryer
● When oil is heated, it adopts automatic constant temperature control, which can dry biochemical products and mineral raw materials, and the temperature can be between 20 and 160 ℃.

● High thermal efficiency, more than 2 times higher than general oven.

● Indirect heating, the material will not be polluted and meet the requirements of "GMP". The equipment is easy to maintain and operate and easy to clean.

Application of double cone rotary vacuum dryer
It is suitable for the concentration, mixing, drying of powder, granular and fibrous materials in the chemical, pharmaceutical, food and other industries, and materials that require low-temperature drying (such as biochemical products, etc.). Drying of toxic materials and materials that are not allowed to destroy crystals.